System information

Inserting, Removing, or Storing a Battery Pack 4-5
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 04/16/99 9:46 AM
Part Number: 103542-001 File name: Ch04.doc
Inserting or Removing
a Dual-MultiBay Battery Pack
Inserting a Dual-MultiBay Battery Pack into
the Dual MultiBay
CAUTION: To prevent loss of work while replacing a battery pack
that is the only power source available to the system:
■ Initiate Suspend (Standby) before removing the discharged
battery pack.
■ Insert the replacement battery pack within 5 minutes after
removing the discharged battery pack.
1. Rotate the flap onto the top of the battery pack and snap the
flap into place .
2. With the large label facing up and the contacts facing the
computer, insert the battery pack as if you were inserting it
into the bottom MultiBay, then slide the battery pack into the
Dual MultiBay .
3. If you initiated Suspend (Standby) before replacing a
battery pack, press the suspend button to return your work to
the screen.