System information

3-8 Using the Keyboard
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: JAbercrombie Saved date: 05/24/99 9:51 AM
Part Number: 103542-001 File name: Ch03.doc
Enabling the Keypad at Startup
■ To set the computer to start up with the embedded
numeric keypad enabled—
1. Turn on or restart the computer, then press
F10 when the
blinking cursor appears upper-right on the screen.
■ To change the language, press F2.
■ For navigation instructions, press F1.
2. Select AdvancedÅDevice Options, then press Enter.
3. Toggle on the Num Lock State at Boot field, then press F10.
4. To save your preferences, then close Computer Setup and
restart the computer, select FileÅSave Changes and Exit,
then press
Enter.
5. When prompted to confirm your action, press F10.
■ To disable the embedded numeric keypad at startup—
Repeat the above procedure, toggling off the Num Lock State
at Boot field.
NOTE: The embedded numeric keypad can be enabled or disabled
with
Fn+Num Lk in either startup state.