System information

13-6 Expanding Memory

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Writer: Karen Williams Saved by: Karen Williams Saved date: 05/10/99 9:59 AM

Part Number: 103542-001 File name: Ch13.doc

Replacing the Memory Expansion Compartment Cover

1. Lay the memory insulator over the memory expansion slots,

ensuring that all edges of the memory insulator are tucked

inside the memory expansion compartment.

2. Replace the memory expansion compartment cover by

placing it flush left over the memory expansion compartment,

then sliding the memory expansion compartment cover right

until it is seated .

3. Replace the screw that attaches the memory expansion

compartment cover to the computer. You can use

■ One of the tamper-resistant Torx T-10 memory security

screws included with the computer, as shown below,

■ A standard Torx T-8 screw.

NOTE: If you use the Torx T-10 memory security screw,

you can also use the Torx T-10 screwdriver included with

the computer.