QuickSpecs

Interface
InterfaceInterface
Interface DAT 40
DAT 40DAT 40
DAT 40 DAT 72
DAT 72DAT 72
DAT 72 DAT 160
DAT 160DAT 160
DAT 160
SCSI Interface
SCSI InterfaceSCSI Interface
SCSI Interface SCSI-3 Ultra 160 LVD SCSI-3 Ultra 160 LVD SCSI-3 Ultra 160 LVD
SCSI Connector
SCSI ConnectorSCSI Connector
SCSI Connector Internal: 68-pin wide HD
LVD
External: 68-pin wide
HDLVD, thumbscrew
Hot-plug: 80-pin SCA-2
(SCSI and power)
Array module: 80-pin
EBBI
Internal: 68-pin wide HD
LVD
External: 68-pin wide
LVDS, thumbscrew
Hot-plug: 80-pin SCA-2
(SCSI and power)
Array module: 80-pin
EBBI
Internal: 68-pin wide HD
LVD
External: 68-pin wide
LVDS, thumbscrew
Array module: 80-pin
EBBI
USB Interface
USB InterfaceUSB Interface
USB Interface USB 2.0 USB 2.0 USB 2.0
USB Connector
USB ConnectorUSB Connector
USB Connector USB standard series B
receptacle
USB standard series B
receptacle
USB standard series B
receptacle
Termination - is only
Termination - is onlyTermination - is only
Termination - is only
required for the SCSI
required for the SCSIrequired for the SCSI
required for the SCSI
product
productproduct
product
No terminator is required for internal model (assumes use of terminated
cable).
External model requires termination with multimode terminator (included with
product).
SCSI Array module requires termination with multimode terminator (ordered
separately - p/n C2364A).
Power Specifications
Power SpecificationsPower Specifications
Power Specifications DAT 40
DAT 40DAT 40
DAT 40 DAT 72
DAT 72DAT 72
DAT 72 DAT 160
DAT 160DAT 160
DAT 160
Power Requirements
Power RequirementsPower Requirements
Power Requirements
(SCSI-2 internal, hot-plug,
and array module)
+5V ± 5% (100mV Max
ripple) @0.6A
+12V ± 10% (150mV
Max ripple) @1.2A
+5V ± 5% (100mV Max
ripple) @0.6A
+12V ± 10% (150mV
Max ripple) @1.2A
Power Requirements
Power RequirementsPower Requirements
Power Requirements (USB
and SCSI-3 internal, and
array module)
+5V ± 5% (100mV Max
ripple) @0.8A
+12V ± 10% (150mV
Max ripple) @0.3A
+5V ± 5% (100mV Max
ripple) @0.8A
+12V ± 10% (150mV
Max ripple) @0.3A
+5V ± 5% (100mV Max
ripple) @1.1A
+12V ± 10% (150mV
Max ripple) @0.4A
Power Requirements
Power RequirementsPower Requirements
Power Requirements
(external)
100 to 240 VAC, 50-60
Hz, auto-ranging
100 to 240 VAC, 50-60
Hz, auto-ranging
100 to 240 VAC, 50-60
Hz, auto-ranging
Power consumption
Power consumption Power consumption
Power consumption (SCSI)
(average)
7.3 Watts 7.1 Watts 10.3 Watts
Power consumption
Power consumptionPower consumption
Power consumption (USB)
(average)
7.3 Watts 7.1 Watts 10.3 Watts
Environmental
EnvironmentalEnvironmental
Environmental
Specifications
SpecificationsSpecifications
Specifications
(all models)
Relative Humidity
Relative HumidityRelative Humidity
Relative Humidity Storage
StorageStorage
Storage 5% to 95%
Operating
OperatingOperating
Operating 20% to 80%
Temperature Range
Temperature RangeTemperature Range
Temperature Range Storage
StorageStorage
Storage -40° to 158° F/(-40° to 70° C)
Operating
OperatingOperating
Operating 41° to 104° F/(5° to 40° C)
Standards Compliance
Standards ComplianceStandards Compliance
Standards Compliance cCSAus Certification to C22.2, No. 60950, TÜV EN60950 (IEC 60950), FCC and CE Declaration of
Conformity, C-TICK Approved (AS/NZS CISPR22), VCCI Approved, RRL Approved, BSMI Approved,
GOSH Approved
QuickSpecs
HP StorageWorks Tape Drives
HP StorageWorks Tape DrivesHP StorageWorks Tape Drives
HP StorageWorks Tape Drives
Technical Specifications
DA - 11883 Worldwide — Version 25 — August 6, 2007 Page 26