Troubleshooting guide

Installing the Rackmount Server 3-25
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: Compaq AlphaServer DS20E System Comments:
Part Number: FR-K8F6W-UA .A01 File Name: d-ch3 Installing a Rack System.doc Last Saved On: 10/4/99 1:25 PM
Installing the Cable Management Arm
Attach the cable management arm to the rear rails of the rack as shown below.
PK1222
Figure 3-17. Installing the Cable Management Arm
NOTE: Be sure that you have attached all cables to the rear of the unit before installing
the cable management arm.
1. Clip U-nuts over the holes in the vertical rail corresponding to the holes
in the cable management bracket.
2. Attach the cable management bracket to the rack with two M6 screws.