Troubleshooting guide

B-2 DS20E Reference Guide
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: Compaq AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA. A01 File Name: n-appb.doc Last Saved On: 10/4/99 11:26 AM
Grounding Methods
There are several methods for grounding. Use one or more of the following
methods when handling or installing electrostatic-sensitive parts:
■ Use a wrist strap connected by a ground cord to a grounded system
chassis. Wrist straps are flexible straps with a minimum of 1 megohm
±
10 percent resistance in the ground cords. To provide proper ground,
wear the strap snug against the skin.
■ Use heel straps, toe straps, or boot straps at standing servers. Wear the
straps on both feet when standing on conductive floors or dissipating
floor mats.
■ Use conductive field service tools.
■ Use a portable field service kit with a folding static-dissipating
work mat.
If you do not have any of the suggested equipment for proper grounding, have
an Authorized Compaq Reseller install the part.
NOTE: For more information on static electricity, or assistance with product
installation, contact your Authorized Compaq Reseller.