Troubleshooting guide

Using the SRM Console 11-49
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
Array # Size Base Addr
------- ---------- ---------
0 512 MB 000000000
1 512 MB 020000000
2 128 MB 050000000
3 256 MB 040000000
Total Bad Pages = 0
Total Good Memory = 1408 MBytes
AlphaServer DS20 500 MHz Console V5.4-xx, Nov 5 1998 11:18:30
P00>>>
Example 11-26. Initialize Command
The initialize command resets the system. Issuing this command is equivalent
to pressing the Reset button. The syntax is:
initialize
After self-tests are executed, the system autoboots unless one of the following
is true:
■ A halt assertion condition exists (see RMC Commands).
■ The auto_action environment variable is set to halt.
If the auto_action environment variable is set to boot or restart and no halt
assertion condition exists, the system autoboots. In all other cases, the system
stops in console mode and does not attempt to boot.