Troubleshooting guide

11-26 DS20E Reference Guide
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
dma0: 80000000 irq0: 7
.
=================================================================
handle: FLOPPY
.
dev: 5
.
iobase0: 3f0 iobase1: 8000000000000000
.
dma0: 2 irq0: 6
.
=================================================================
P00>>>
Example 11-12. Isacfg Command
The isacfg command is used to display or modify the ISA bus configuration
data. The syntax is:
isacfg [-slot slot # ] [-dev device # ] [ {-all | -rm | -mk | -mod | -init } ] [-field
value]
-slot slot #
The PCI slot allocated to the ISA bus (0).
-dev device # The ISA device number allocated to the device upon which the isacfg
command is to operate.
-all
Sets the default parameters to all devices on the ISA bus.
-rm
Removes an ISA device from the ISA bus.
-mk
Removes an ISA device from the ISA bus.
-init Initializes the device(s) indicated by the –dev or –all switches.
-field value
The name of the field followed by the value to be deposited in it.