Troubleshooting guide

Using the SRM Console 11-21
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
Configuring the System
Configuring DSSI
The set host command is used for system configuration when a DSSI device is
in the system.
P00>>> show device
dka0.0.0.7.1 DKA0 RZ1CB-CS 0844
dka100.1.0.7.1 DKA100 RZ28 D41C
dka200.2.0.7.1 DKA200 RZ28 441C
dka300.3.0.7.1 DKA300 RZ1EF-AB 0370
dka500.5.0.7.1 DKA500 RRD47 0557
dkb0.0.0.2000.1 DKB0 RZ1DB-BA LYG0
dkb200.2.0.2000.1 DKB200 RZ1DB-BA LYG0
dkb400.4.0.2000.1 DKB400 RZ1CB-BA LYG0
dkc100.1.0.2001.1 DKC100 RZ1DB-BA LYG0
dkc300.3.0.2001.1 DKC300 RZ1DB-BA LYG0
dua101.3.0.8.0 $1$DIA101 (RF0700) RF35
dua103.1.0.8.0 $1$DIA103 (RF0701) RF36
dua110.0.0.8.0 $1$DIA110 (DENVER) RF74
dua240.2.0.8.0 $1$DIA240 (E1ILMO) EF52
dva0.0.0.0.0 DVA0
ewa0.0.0.2002.1 EWA0 00-06-2B-00-0A-59
pka0.7.0.7.1 PKA0 SCSI Bus ID 7 5.57
pkb0.7.0.2000.1 PKB0 SCSI Bus ID 7
pkc0.7.0.2001.1 PKC0 SCSI Bus ID 7
pua0.7.0.8.0 PIA0 DSSI Bus ID 7
P00>>> set host -dup dua101
starting DIRECT on pua0.3.0.8.0 (RF0700)