Troubleshooting guide

Using the SRM Console 11-5
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: l-ch11 Using the SRM Console.doc Last Saved On: 10/4/99 2:05 PM
Table 11-1
Summary of SRM Console Commands
continued
Command Function
login
Turns off secure mode, enabling access to all
SRM console commands during the current
session.
more
Displays a file one screen at a time.
prcache
Utility that initializes and displays status of the
optional PCI NVRAM device.
set envar
Sets or modifies the value of an environment
variable.
set host
Connects to an MSCP DUP server on a DSSI
device.
set password
Sets the console password for the first time or
changes an existing password.
set secure
Enables secure mode without requiring a restart
of the console.
show envar
Displays the state of the specified environment
variable.
show config
Displays the configuration at the last system
initialization.
show cpu
Displays the state of each processor in the
system.
show device
Displays a list of controllers and their devices in
the system.
show memory
Displays memory module information.
show pal
Displays the version of the privileged architecture
library code (PALcode).
show power
Displays information about the power supplies,
system fans, CPU fans, and temperature.
show version
Displays the version of the console program.
stop Halts the specified processor. (Same as halt.)
test
Runs firmware diagnostics for the system.