Troubleshooting guide

Managing the System Remotely 10-7
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: AlphaServer DS20E System Comments:
Part Number: ER-K8F6W-UA .A01 File Name: k-ch10 Managing the System Remotely.doc Last Saved On: 10/4/99 1:33 PM
RMC Commands
The RMC commands given in Table 10-1 are used to control and monitor a
system remotely.
Table 10-1
RMC Command Summary
Command Function
halt
Halts the system. Emulates pressing the Halt button
and immediately releasing it.
haltin
Causes a halt assertion. Emulates pressing the Halt
button and holding it in.
haltout
Terminates a halt assertion created with haltin.
Emulates releasing the Halt button after holding it in.
help or ?
Displays the list of commands.
poweroff
Turns off power. Emulates pressing the On/Off button
to the off position.
poweron
Turns on power. Emulates pressing the On/Off button
to the on position.
quit
Exits console mode and returns to system console
port.
reset
Resets the system. Emulates pressing the Reset
button.
setesc
Changes the escape sequence for invoking command
mode.
status
Displays system status and sensors.