Installation guide

Installing on OpenVMS Alpha
4.3 Post-Installation
Rev. 1/9/01–A
4–14 Web-Based Enterprise Service Installation Guide
Enter the following commands as appropriate if you wish to re-add DESTA or RCM to the
startup process:
$ MCR SYSMAN
SYSMAN> STARTUP ADD FILE/PHASE=LPMAIN DESTA$STARTUP.COM
SYSMAN> STARTUP ADD FILE/PHASE=LPMAIN RCM$STARTUP.COM
4.3.4 Determining Which Tools are Installed
On any system that you are unsure about, you can determine what parts of WEBES are
installed as follows.
Compaq Analyze
Compaq Analyze is installed if you have the following file on your system:
{ WEBES install directory }[.CONFIG]CONFIGDEFAULTSCAOPENVMS.TXT
CCAT
CCAT is installed if you have the following file on your system:
{ WEBES install directory }[.CONFIG]CONFIGDEFAULTSCCAT.TXT
RCM
RCM appears as a separate kit. Check PRODUCT SHOW PRODUCT to see if you have it
installed.
4.3.5 Determining Which Versions are Installed
To determine what versions of WEBES and its component tools are installed, open and read
the text files shown in Table 4–2.
Table 4–2 Determining WEBES and Tool Versions
Tool File for Version Information
WEBES Overall Kit {
WEBES install directory }[.WEBES]RELEASE.TXT
WEBES Common Components (WCC) {
WEBES install directory }[.DESTA]RELEASE.TXT
Compaq Analyze {
WEBES install directory }[.CA]RELEASE.TXT
CCAT {
WEBES install directory }[.CCAT]RELEASE.TXT
RCM Instead, check PRODUCT SHOW PRODUCT RCM
to see if you have it installed.