Installation guide

Installing on OpenVMS Alpha
4.1 Pre-Installation
Rev. 1/9/01–A
Web-Based Enterprise Service Installation Guide 4–5
The web interface will not function unless you download the Java301 file with the Java
extensions and define the NETSCAPE_CLASSPATH variable as described on the download
page.
4.1.3 CCAT System Requirements
In addition to the common WEBES prerequisites, your system must meet the following
requirements before you install the CCAT component:
• Motif or X-Window system terminals are required for CCAT.
• Minimum 8 000 blocks free
4.1.4 RCM System Requirements
In addition to the common WEBES prerequisites, your system must meet the following
requirements before you install the RCM component:
• Required privileges are OPER, CMKRNL, DIAGNOSE, SYSPRV, SYSLCK, and
PHY_IO .
4.1.5 Extracting the Installation Kit
To extract the WEBES installation kit, enter the following command. If there is already a kit
subdirectory when you perform this command, be sure there are no previous WEBES kit files
in this subdirectory before performing the command.
$ run WEBES_< version >.EXE
This command extracts the WEBES installation files. Messages similar to the following
appear:
UnZipSFX 5.32 of 3 November 1997, by Info-ZIP ([e-mail])
********************************************************************
WEBES Kit
WEBES <
version > for OpenVMS Alpha. 20-SEP-2000
********************************************************************
inflating: dec-axpvms-rcm-<
version >.pcsi
inflating: dec-axpvms-webes-< version >.pcsi