Installation guide

Installing on OpenVMS Alpha
4.1 Pre-Installation
Rev. 1/9/01–A
4–4 Web-Based Enterprise Service Installation Guide
2. In the downloadable drivers & utilities section, click on patches. The Compaq Services
Software Patches page appears.
3. Click on browse patch tree.
4. Click on vms.
5. Click on axp.
6. Click on the operating system version.
7. Locate the patch in the list of available patches, and save the patch to your system.
How to Change Quotas
To change quotas, enter the following commands:
$ SET DEF SYS$SYSTEM
$ MCR AUTHORIZE
UAF> MODIFY
username /PGFLQUO=300000
UAF> MODIFY
username /BYTLM=170000
UAF> EXIT
$ LOGOUT
When you log in again, the new quotas are in effect. You must log out and log in again before
installing the WEBES kit.
4.1.2 Compaq Analyze System Requirements
In addition to the common WEBES prerequisites, your system must meet the following
requirements before you install the Compaq Analyze component:
• Character-cell terminals are required for Compaq Analyze
• DSNlink Version 2.2E is required if you want SICL notification of problem reports.
• Minimum 36 000 blocks free
• Set the FILLM process quota to 400 files
• The web interface requires a web browser program that supports Java 1.1 applets and
HTML frames. The minimum browser version is Netscape version 3.0.3.
• If you want to start with a clean error log as of this installation, rename the existing error
log file to another name before installing WEBES. The default error log is typically
sys$sysroot:[syserr]errlog.sys.
Netscape Navigator for OpenVMS
If you want to use the web interface and need a copy of Netscape that runs on OpenVMS, go to
the following URL:
http://www.openvms.digital.com/openvms/internetnetworks.html
Click the Netscape Navigator Gold for AlphaV3.03 link under “Netscape Browsers for
OpenVMS,” and complete the download form.