Installation guide

Installing on Tru64 UNIX
3.2 Installing WEBES
Rev. 1/9/01–A
Web-Based Enterprise Service Installation Guide 3–11
2. Press the [Enter] key. The program displays settings and gives you the opportunity to
change them:
The current UniCensus Installation parameter settings are:
CollectionDirectory = /var/tmp
KitDirectory = /var/opt/UniCensus
ArchiveDirectory = /var/opt/UniCensus/archive
MaxArchives = 10
ManualDirectory = /var/opt/UniCensus/manual_collections
UniCensusTempWorkDir = /var/tmp
UniCensusSubscriptAction = no
UniCensusAdhocDir = /var/opt/UniCensus/adhoc
UniCensusRecoverySaves = /var/opt/UniCensus/recovery
Do you want to change any of these parameters?
[ yes/no ] [ q,?,o ](default= no):
3. After completing the settings, enter or confirm your customer information:
The current UniCensus Customer parameter settings are:
CompanyName = XYZ Company
ContactName = Chris Green
ContactTelephone = 123-456-7890
ContactEmail = [e-mail]
CustomerAccessID = 1a2b3c
TAMName = Terry Gray
TAMEmail = [e-mail]
Do you want to change any of these parameters?
[ yes/no ] [ q,?,o ](default= no):
4. Enter or confirm your hardware information. Clusters will list more than one node:
The current UniCensus System Data parameter settings are:
mgdsys = A01234567890
Do you want to change any of these parameters?
[ yes/no ] [ q,?,o ](default= no):
5. Decide whether you want RCM collection switched on or off:
The RCM collection option is switched on. Do you want to switch it off?
[ yes/no ] [ q,?,o ](default= no):
6. If you chose RCM (option 1 or 3) at the beginning of this phase of the installation, you
can now enter or confirm settings for data transport and collection scheduling:
The current RCM option settings are:
TransportOption = FTP
LocalTransportOption = none
Do you want to change any of these parameters?
[ yes/no ] [ q,?,o ](default= no):
The current RCM Schedule details are:
Frequency = monthly
DayOfWeek =
DayOfMonth = 1
Time = 03:00