Installation guide

Installing on Tru64 UNIX
3.2 Installing WEBES
Rev. 1/9/01–A
Web-Based Enterprise Service Installation Guide 3–9
Checking for RCM prerequisites
RCM requires that dupatch be installed and baselined if you wish to
gather information on the patches installed on your system.
Please install before attempting to run RCM.
Installation will now continue.
Systems that use CT5 display the following message:
CT5 system. DECEvent not required.
Systems that do not use CT5 display the following message about DECevent, if
DECevent is not installed:
RCM requires DECevent to be installed. Please install before
attempting to run RCM. Installation will now continue.
All systems proceed with messages similar to the following:
Proceeding with installation.
UniCensus for Alpha AXP Digital UNIX - <
version >
Copying from /usr/opt/compaq/svctools/kits/unicen (disk)
Verifying
1 of 1 subset(s) installed successfully.
unicensus(8) man page installed
unisetup(8) man page installed
Copying /var/opt/rcm_config to rcm_config
Copying /var/opt/rcm_customer_info to rcm_config
Copying /var/opt/rcm_ssnum to rcm_config
Please wait while archived data from previous installation is being
restored.
Restoration of archived data completed.
Checking to see if this is a CT5 machine.
This may take a few seconds...
Please wait...
For DS10, DS10L, DS20, DS20E, ES40 and GS80/GS160/GS320 systems, the
installation program installs CT5 at this point:
This machine uses Configuration Tree 5 as its hardware/software
description method.
Checking to see if a suitable CT5 Collector is installed.
Please wait.
No CT5 Collector is installed. Installing collector.
blocksize = 256
xkit
x kit/instctrl
x kit/instctrl/CT5BASE030.inv, 4233 bytes, 9 tape blocks
x kit/instctrl/CT5BASE030.ctrl, 139 bytes, 1 tape blocks
x kit/instctrl/CT5BASE030.scp, 4875 bytes, 10 tape blocks
x kit/instctrl/CT5.image, 24 bytes, 1 tape blocks
x kit/CT5BASE030, 225280 bytes, 440 tape blocks
x kit/INSTCTRL, 20480 bytes, 40 tape blocks
x kit/CT5.image, 24 bytes, 1 tape blocks