Installation guide

Installing on Tru64 UNIX
3.2 Installing WEBES
Rev. 1/9/01–A
3–4 Web-Based Enterprise Service Installation Guide
• Disk space—RCM data collection utilities require the following space during runtime:
• 18MB in /usr/.smdb
• 4MB in /var/tmp
• 600KB per collection in /var/opt/UniCensus/archive/rcm
• Utilities—the RCM Unicensus data collection process requires the following minimum
versions of utilities:
• sys_check 114.0 (already included in Tru64 UNIX versions 4.0E, 4.0F, and 5.0)
• DECevent 3.0 (DECevent is not required for CT5 systems, which include DS10,
DS10L, DS20, DS20E, ES40 and GS80/GS160/GS320.)
3.1.5 Extracting the Installation Kit
To extract the WEBES installation kit, enter the following command. If there is already a “kit”
subdirectory when you perform this command, be sure there are no previous WEBES kit files
in this subdirectory before performing the command.
# tar xvf WEBES_U310.tar
This command creates a kit directory (if it does not already exist), and extracts the WEBES
installation files. Messages similar to the following appear:
blocksize = 256
x ./kit
x ./kit/instctrl
x ./kit/instctrl/WEBESBASE<
version >.inv, 7693 bytes, 16 tape blocks
x ./kit/instctrl/WEBESBASE<
version >.ctrl, 144 bytes, 1 tape blocks
x ./kit/instctrl/WEBESBASE<
version >.scp, 54626 bytes, 107 tape blocks
x ./kit/instctrl/WEB.image, 26 bytes, 1 tape blocks
x ./kit/WEBESBASE<
version >, 24115200 bytes, 47100 tape blocks
x ./kit/INSTCTRL, 71680 bytes, 140 tape blocks
x ./kit/WEB.image, 26 bytes, 1 tape blocks
3.2 Installing WEBES
After all Pre-Installation requirements are met, follow these steps to install WEBES. You can
quit the installation process at any time by typing q and pressing the [Enter] key. If you need
help with a specific field, type ? and press the [Enter] key.
Note
When installing WEBES, do not select the -D option. To install WEBES to a
non-default directory, modify the path when asked for the installation directory during
installation.