QuickSpecs
Table Of Contents
HP Power Supplies
NOTE:
Many HP ProLiant Servers now offer new power options, including
Common Slot Power Supplies. These power supplies come in multiple power
ratings and higher efficiency levels to offer the Right Size solution to fit your
configuration. This provides improved power delivery and the advantage of
reclaiming lost power. Prior to making a power supply selection it is "highly
recommended" that the "HP Power Advisor" is run to determine the right size
power supply for your server configuration. The HP Power Advisor is located at:
www.hp.com/go/proliant-energy-efficient
HP 460W HE Hot Plug AC Power Supply Kit
503296-B21
HP 750W Common Slot High Efficiency Power Supply Kit
512327-B21
HP 460W Common Slot Platinum Power Supply Kit
593188-B21
HP 750W Common Slot Platinum Power Supply Kit
593831-B21
CAUTION:
Optional Power Supplies used for Redundancy "MUST" match the
original supplied power supply. Upgrades for more power headroom, when
replacing the original power supplies must match if purchased for redundancy.
Option Kits contain optional power supply, an IEC power cable and PDU IEC
cables. In ProLiant Servers that have more than one power slot (bay), same size
power supplies are recommended. If non-matched power supplies are inserted
you will get errors and operation will fail.
Step 3: Choose Additional Factory Integratable Options (only one from each list
unless otherwise noted)
HP Storage Controller
HP Smart Array P410/ZM 2-ports Int PCIe x8 FIO SAS Controller
462860-B21
HP Smart Array P411/256 2-ports Ext PCIe x8 FIO SAS Controller
491193-B21
HP Smart Array P410/256 2-ports Int PCIe x8 FIO SAS Controller
491195-B21
HP Smart Array P212/256 1-ports Int/1-ports Ext PCIe x8 FIO SAS Controller
491191-B21
Step 4: Choose Additional Options for Factory Integration
NOTE:
For additional options, please refer to the "Core Options" and "Additional Options" sections below.
QuickSpecs
HP ProLiant DL180 Generation 6
Configuration Information - Factory Integrated Models
DA - 13248 Worldwide QuickSpecs — Version 31 — 3-4-2011
Page 25