Technical data

Troubleshooting
4-18
Problem Possible Cause Action
Computer does not
recognize an internal or
external SCSI hard disk
drive or device.
SCSI device jumpers incorrectly
set.
Refer to the supplied SCSI device kit
installation instructions.
SCSI ID conflicts. Refer to the supplied SCSI device kit
installation instructions on setting SCSI
IDs.
Terminating resistors not
removed from the SCSI device.
Remove terminating resistors. Refer to the
supplied kit installation instructions.
SCSI option not enabled in
BIOS Setup utility.
Run the BIOS Setup utility and enable
SCSI option.
SCSI cable not terminated. Terminate each end of the SCSI cable.
SCSI device not plugged in. Check power and SCSI cables.
Loose cable connectors. Secure all cable connections.
continued