Technical data

Troubleshooting
4-7
DIGITAL PC 3500/5510
Using the Diagnostic Diskettes
To boot from AMI Diagnostics Diskette #1, insert the diskette into the floppy disk
drive and power on
the
computer. After the program begins, follow the instructions
displayed on
the
monitor screen.
NOTE:
If the computer boots from the hard disk drive instead of the
diskette drive, run the BIOS Setup utility to change the boot sequence.
In the Boot menu, make the diskette drive the first entry in the boot
priority list, save
the
changes, then restart the computer.
For more information about using the BIOS Setup utility, see the
System Reference manual included with
the
DIGITAL PC.
For more information about each of the diskette images and their use, see the
README.TXT file which is included on each diagnostic diskette. Each has
detailed information about the diagnostics and its test parameters.