Technical data

Troubleshooting
4-6
3. The DOS-based diagnostics program will launch and
the
PC can be tested.
For more detailed instructions about using this application, refer to the online
help within the program.
AMI Diagnostics on Diskettes
Diskette images of AMI Diagnostics are provided on the DIGITAL System Software
CD. If you would prefer to boot from diskette instead of the CD, DIGITAL
recommends that you create these diskettes as soon as possible. For detailed
instructions on doing this, see the CD-INFO.TXT file on the DIGITAL System
Software CD. The AMI Diagnostic diskette images, stored on the CD, consist of the
following:
Title Description
AMI Diagnostic
Diskette #1
This diskette contains the base diagnostics and the Install
program to install AMI Diagnostics on the hard disk drive.
This is a bootable diskette image.
DIGITAL Vendor
Extended Test
Diskettes
These diskettes contain additional diagnostics for specific
features or options.
These are bootable diskette images.
See the applicable README.TXT file on each of the diagnostics diskettes for
installation instructions and additional information.
Creating the Diagnostic Diskettes
To create AMI Diagnostic diskettes, follow the steps below:
1. Before beginning, be sure you have several blank 1.44 MB diskettes
available.
2. Insert the System Software CD-ROM into
the
PC’s CD-ROM drive.
3. The CD will autorun. Choose
the
operating system, Windows 95 or Windows
NT.
4. At the System Software Main Menu, you’ll be presented with a menu of
software applications from which to choose.
5. Click Diagnostics and follow the instructions for creating and labeling the
diagnostic diskettes.