Technical data

System Software
3-12
Restoring System Software
In the event of a hard disk failure you will need to reinstall the operating system,
device drivers, and any other utilities or applications that were on the hard disk drive.
At other times you may only need to replace a driver or an application that was
accidentally deleted or corrupted.
Before you begin the installation, make sure you have the operating system kit
supplied with the computer, the DIGITAL System Software CD, and any other
applications that were
installed on the computer.
The following instructions are for a complete restoration of the computer software.
1. If possible, back up data and any applications.
2. Reformat the hard disk drive, if necessary. You need to reformat the hard
disk drive if it failed completely or if you replaced it with a new one.
3. Install the operating system.
Refer to the supplied Windows 95 and Windows NT Workstation documentation
for additional information.