Technical data

Parts Replacement
5-72
Removing the Wire Assembly, Headphone/Microphone (Short
Tower Computer)
1. Turn off the computer, monitor, and then disconnect power from the
computer.
2. Remove the outside cover.
3. Remove the front bezel.
4. Push in on the tabs to disengage the control panel assembly.
The headphone and microphone connections are on a card inside the
control panel assembly. This card is attached to the cable.
5. Remove the headphone and microphone card from the control panel
assembly.
Push down on the headphone and microphone card to release it from the
tabs and then slide the card back.
6. Unplug the other side of the cable from the backplane.
7. Slide the card through the appropriate front slot and then remove the
headphone and microphone cable.