Technical data

Technical Specifications
A-13
If You Forget Your Password
Use the following procedure to erase a password from your computer.
1. Turn off your computer and remove the outside cover.
2. Change switch SW1-1 to clear (switch ON).
3. Reconnect your computer and turn it on.
Booting your computer with this switch in the ON position erases the existing
password(s).
4. Turn off your computer.
5. Change switch SW1-1 to Normal (switch OFF).
6. Replace outside cover.
7. Reconnect your computer and turn it on.
8. Using the BIOS Setup utility, assign a new password.
Refer to Chapter 2, “Using the BIOS Setup Utility,” for more information.