Technical data

Technical Specifications
A-5
Product Materials and Recycling
This computer has been designed with several features intended to reduce
environmental impact in manufacturing, use, and end-of-life disposition.
Ozone Depleting
Substances (ODS)
This product and its shipping package do not contain, nor are
they manufactured with, Class I ODS, as defined in Title VI,
section 611 of the clean air act amendments of 1990.
Use of asbestos
Digital Equipment Corporation does not use asbestos in any form
in the manufacturing of its products.
Recycled paper in
documentation
User documentation is printed on paper with a post-consumer
recycled content of between 10 and 60%.
Use of PVC in
enclosure pieces
Polyvinylchloride (PVC) is not used in plastic enclosure pieces.
Design for
disassembly/re-cycling
This product has been designed for ease of disassembly so that
materials can be easily separated for recycling at the end of the
product's useful life. One type of fastener is generally used to
minimize tools required to disassemble. Plastic components
have been marked with standard identification symbols to
facilitate separation for recycling. Snap fit fastening techniques
have been used, where possible, to reduce disassembly effort.
Fastening of dissimilar materials can be disconnected, allowing
materials to be separated for recycling.
Environmental
packaging features
The outer container on this product is made from unbleached,
natural corrugated fiberboard which can be readily recycled in
most areas. Protective cushioning pieces are made from
expandable polypropylene which is more efficient than other
foams and requires less material to provide equivalent protection,
thereby reducing packaging waste. The cushioning pieces are
marked with the Society of the Plastics Industry (SPI) material
identification symbol for polypropylene to facilitate recycling.