Technical data

Main Logic Board Expansion
4-7
Installing Video Memory
Your computer comes with either an integrated Matrox 3D graphics controller and
2 MB of SGRAM video memory on the main logic board or, a Diamond AGP
graphics card with 4 MB of SGRAM video memory on the card. You can upgrade
both video options to 6 MB and 8 MB respectively by installing an optional 4 MB
SODIMM.
NOTE
:
The SODIMM connector used by the Matrox 3D graphics
controller is located on the main logic board. The SODIMM
connector used by the Diamond AGP graphics controller is located
on the AGP card.
To install an optional SODIMM:
1. Turn off your computer and monitor.
2. Disconnect all external devices, ac power, and monitor power.
3. Remove the outside cover.
4. Install the optional SODIMM.
CAUTION:
Make sure the SGRAM module connector is
correctly aligned with the mating connector on the main logic
board or the AGP graphics card. Incorrect installation can cause
faulty computer operation.
5. Replace the outside cover.
6. Connect all external devices and restore power.