Installation guide

Appendix A. Quick Setup
EK–WNTMP–MH. D01 123995–002 A–11
Quick Setup Guide
for
RA8000 or ESA12000 (Fibre Channel) and One Windows NT
Server
NOTE
Do not install Secure Path for Windows in an Alpha
server which has FX!32 installed.
STEP 1: Inventory Additional Components Needed
Qty Part Number Description
1 QB-669AA-SA Secure Path for Windows (version 2 or higher)
1 KGPSA-BC Fibre Channel Host Bus Adapter
1 DS-DHGGB-AA Fibre Channel Hub
1 DS-DXGK2-SA Fibre Channel Connection Kit 2 GBIC 2*2M
STEP 2: Examine Present Configuration
Action
✔
Single path configuration functions properly – check event log on server
Serial line connection available to the controller
StorageSets and NT volumes defined – not hardware partitioned
Windows NT system disk not part of RAID subsystem
TCP/IP protocol installed on Windows NT server
Verify Client(s) can ping Secure Path server(s) and server(s) can ping client(s)
[Alpha servers] FX!32 not installed
STEP 3: Install Secure Path Software
From the Secure Path CDROM, launch \SPINSTAL\SETUP.EXE, and follow directions. Setup
will shutdown the server. Do not restart the server until you have completed preparing the
RAID subsystem, as described in Step 4.