Installation guide

StorageWorks Secure Path for Windows NT
A–8 123995–002 EK–WNTMP–MH. D01
Quick Setup Guide
for
RA7000 or ESA10000 (SCSI) and a Windows NT Cluster with
SCSI Hubs
NOTE
Do not install Secure Path for Windows in an Alpha
server which has FX!32 installed.
STEP 1: Inventory Additional Components Needed
Qty Part Number Description
1 QB-669AA-SA Secure Path for Windows (version 2 or higher)
2 AHA2944UW UltraSCSI Host Bus Adapter
1 SWXKT-EA UltraSCSI Hub Cluster RAID Connection Kit
STEP 2: Examine Present Configuration
Action
✔
Single path configuration functions properly – check event log on both servers
Serial line connection available to the controller
StorageSets and NT volumes defined – not hardware partitioned
Windows NT system disk not part of RAID subsystem
TCP/IP protocol installed on both Windows NT servers
[Alpha servers] FX!32 not installed on either server
STEP 3: Install Secure Path Software
From the Secure Path CDROM, launch \SPINSTAL\SETUP.EXE on each server, and follow
directions. Setup will shutdown the server. Do not restart the server until you have completed
preparing the RAID subsystem, as described in Step 4.