Installation guide

StorageWorks Secure Path for Windows NT
A–2 123995–002 EK–WNTMP–MH. D01
Quick Setup Guide
for
RA7000 or ESA10000 (SCSI) and One Windows NT Server
NOTE
Do not install Secure Path for Windows in an Alpha
server which has FX!32 installed.
STEP 1: Inventory Additional Components Needed
Qty Part Number Description
1 QB-669AA-SA Secure Path for Windows (version 2.1)
1 AHA2944UW UltraSCSI Host Bus Adapter
1 SWXKT-FA RAID SCSI Connection Kit
STEP 2: Examine Present Configuration
Action
✔
Single path configuration functions properly – check event log
Serial line connection available to the controller
StorageSets and NT volumes defined – not hardware partitioned
Windows NT system disk not part of RAID subsystem
TCP/IP protocol installed on Windows NT server
[Alpha servers] FX!32 not installed
STEP 3: Install Secure Path Software
From the Secure Path CDROM, launch \SPINSTAL\SETUP.EXE, and follow directions. Setup
will shutdown the server. Do not restart the server until you have completed preparing the
RAID subsystem, as described in Step 4.