Installation guide

StorageWorks Secure Path for Windows NT
6-4 123995-002 EK-WNTMP-MH. D01
6.3 Host Connection Status Monitor
As shown in Figure 6-4, Secure Path Manager will display, immediately below the tool
bar, an icon representing a connection to each active Secure Path host. If a connection is
lost to a host, an "X" will appear over that host’s icon. Secure Path Manager periodically
attempts to reconnect to selected hosts and will remove the "X" if the connection state is
re-established.
In cluster configurations, if Secure Path Manager loses connection to one of the hosts, it
will display the Secure Path configuration state based on information received from the
surviving host.
Figure 6–4 Secure Path Host Connection Icons