Installation guide

Chapter 6. Using Secure Path Manager
EK-WNTMP-MH. D01 123995-002 6-3
Each instance of Secure Path Manager is capable of managing one single host
configuration with multiple storage subsystems or a dual-host MSCS cluster with multiple
subsystems. In order to manage multiple single host or MSCS configurations, additional
instances of the Secure Path Manager are required, one for each single host or pair of
clustered hosts.
To change an agent password you must run the Secure Path Agent Configuration utility
located in the Start menu along with the Secure Path Manager application. Once you have
changed an agent’s client access list and/or password following initial setup, you must
stop and restart the agent using the Services Applet located in Control Panel. Find and
select the Secure Path Agent in the list of services and push the Stop button (Figure 6-3).
Once the agent has stopped, select Secure Path Agent again and press the Start button.
The agent will now update its client and/or password database. In cluster environments
make sure you do this for the agent on each host.
Figure 6–3 Stopping the Secure Path Agent
If you experience problems connecting the client with the Secure Path agent/s, please
refer to Appendix C, Troubleshooting Secure Path Connection Problems, for help.