User's Manual

Setup Utility (Intel Celeron Models)
Computer Setup (Continued)
Heading Option Description
Advanced*
(continued)
Device Options
(continued)
Allows you to set:
• ACPI S3 Hard Disk Reset (enable/disable).
Resets the hard disk on a boot from the S3
sleep state.
• ACPI S3 PS2 Mouse Wake Up
(enable/disable). Allows the mouse to wake
the system from the S3 sleep state.
• AGP Aperture size (options vary depending
on platform) allows you to specify the
amount of system memory reserved for use
by your graphics controller.
• Monitor Tracking (enable/disable). Allows
ROM to save monitor asset information.
• Processor Number (enable/disable) for
Pentium III processors.
PCI VGA Configuration Appears only if there are multiple PCI video
adapters in the system. Allows users to specify
which VGA controller will be the “boot” or
primary VGA controller.
Support for Computer Setup options may vary depending on your specific hardware
configuration.
* These options should be used by advanced users only.
Compaq Evo D300v User’s Guide 4-17