User's Manual

Setup Utility (Intel Celeron Models)
Computer Setup (Continued)
Heading Option Description
Security
(continued)
Device Security Enables/disables Serial ports A and B, parallel
ports, USB ports, system audio security,
network controllers (some models), and SCSI
controllers.
Network Service Boot Enables/disables the computer’s ability to boot
from an operating system installed on a
network server. (Feature available on NIC
models only; the network controller must reside
on the PCI bus or be embedded on the system
board.)
System IDs Allows you to set:
• Asset tag (16-byte identifier) and ownership
Tag (80-byte identifier displayed during
POST)
• Chassis serial number or Universal Unique
Identifier (UUID) number if current number
is invalid (these ID numbers are normally
set in the factory and are used to uniquely
identify the system)
• Keyboard locale setting (e.g., English or
German) for System ID entry
Password Options Allows you to:
• Enable/disable network server mode.
This selection will appear only if a
power-on password is set.
• Specify whether password is required for
warm boot (CTRL+ALT+DEL).
This selection is available only when
Network Server Mode is disabled.
Support for Computer Setup options may vary depending on your specific hardware
configuration.
4-10 Compaq Evo D300v User’s Guide