User's Manual

Setup Utility (Intel Pentium 4 Models)
Power Management Setup Screen
The Power Management Setup screen is used to configure power
management features.
Power Management Setup Screen
Heading Description
ACPI Standby State Enables the system to go into S1 or S3 standby state when
computer is inactive for a certain period of time.
Power Button Function Power button configuration (on/off or sleep/wake) under APM-
enabled operating systems.
Restore On AC/Power Loss Power Off -- System will remain off when power is restored to
the system, whether or not system was on or off when power
was lost.
Power On -- System will boot to the operating system when
power is restored to the system, whether or not system was on
or off when power was lost.
Last State -- System will boot to the operating system or remain
off when power is restored to the system, depending on the state
of the system when power was lost.
Resume On LAN Header Enables/disables the system to be booted from another
networked computer via the Wake-on-LAN feature.
Resume on PME PME (power management event) wakeup events
(enable/disable).
Support for Setup Utility options may vary depending on your specific hardware configuration.
3-6 Compaq Evo D300v User’s Guide