Technical data

ping
kernel options are off and this flag is used, the time is displayed to three decimal
places, but in milliseconds.
-v
Specifies detailed output. ICMP packets other than ECHO_RESPONSE that are
received are listed.
Examples
The following example shows how to use the ping command.
1.
TCPIP> ping
PING rufus.lkg.dec.com (10.10.2.4): 56 data bytes
64 bytes from 10.10.2.4: icmp_seq=0 ttl=64 time=30 ms
64 bytes from 10.10.2.4: icmp_seq=1 ttl=64 time=0 ms
64 bytes from 10.10.2.4: icmp_seq=2 ttl=64 time=0 ms
64 bytes from 10.10.2.4: icmp_seq=3 ttl=64 time=0 ms
----rufus.lkg.dec.com PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/8/30 ms
A–30 Troubleshooting Utilities Reference