Technical data

Troubleshooting Techniques and Tools
1.2 Isolating Problems
State: Enabled
Transport:
Domain:
Retry:
Timeout:
Servers:
Path:
Make sure the remote servers are reachable (using ping ) and that they are valid
name servers.
If your name server resides on the local system, use the SHOW NAME_SERVICE
command to make sure your resolver points to
localhost .
Next, verify that the TCPIP$BIND process is enabled and running. First, enter
the following command to determine whether TCPIP$BIND is enabled:
TCPIP> SHOW SERVICE
Service Port Proto Process Address State
BIND 53 TCP,UDP TCPIP$BIND 0.0.0.0 Enabled
DHCP 67 UDP TCPIP$DHCP 0.0.0.0 Enabled
DIOSERVER 1451 TCP CLM 0.0.0.0 Disabled
ECHO 7 TCP MULTI 0.0.0.0 Disabled
ESNMP 705 UDP ESNMP 0.0.0.0 Disabled
FINGER 79 TCP TCPIP$FINGER 0.0.0.0 Enabled
FTP 21 TCP TCPIP$FTP 0.0.0.0 Enabled
HELLO 12345 TCP HELLO_WORLD 0.0.0.0 Disabled
JOHN 520 UDP UCX$ROUTER 0.0.0.0 Disabled
LBROKER 6570 UDP TCPIP$LBROKER 0.0.0.0 Disabled
LPD 515 TCP TCPIP$LPD 0.0.0.0 Enabled
MATT 5432 TCP TCPIP$RLOGIN 0.0.0.0 Disabled
METRIC 570 UDP TCPIP$METRIC 0.0.0.0 Enabled
MOUNT 10 TCP,UDP TCPIP$MOUNTD 0.0.0.0 Enabled
NFS 2049 UDP TCPIP$NFS 0.0.0.0 Enabled
NOTES 3333 TCP NOTESRVR 0.0.0.0 Enabled
NTP 123 UDP TCPIP$NTP 0.0.0.0 Enabled
PCNFS 5151 TCP,UDP TCPIP$PCNFSD 0.0.0.0 Enabled
POP 110 TCP TCPIP$POP 0.0.0.0 Enabled
PORTMAPPER 111 TCP,UDP TCPIP$PORTM 0.0.0.0 Enabled
REXEC 512 TCP TCPIP$REXEC 0.0.0.0 Enabled
RLOGIN 513 TCP not defined 0.0.0.0 Enabled
RSH 514 TCP TCPIP$RSH 0.0.0.0 Enabled
SMTP 25 TCP TCPIP$SMTP 0.0.0.0 Enabled
SNMP 161 UDP TCPIP$SNMP 0.0.0.0 Enabled
TELNET 23 TCP not defined 0.0.0.0 Enabled
TFTP 69 UDP TCPIP$TFTP 0.0.0.0 Enabled
XDM 177 UDP TCPIP$XDM 0.0.0.0 Enabled
If the BIND process is enabled, it will appear in the display.
Then determine whether the BIND process is running by entering the following
command:
1–24 Troubleshooting Techniques and Tools