Specifications

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
CAUTION
Pull only on the connector, do not pry. Pulling on the wires will make the
connector grip the pins tighter, which will damage the connector.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
To replace the power supply assembly, reverse Steps 1 through 6.
NOTE: Be sure to securely tighten the mounting screw with the 5/16 inch box
end wrench because using only the socket extension wrench may not securely
tighten the mounting screw (thereby causing grounding problems).
COMPAQ PORTABLE 286 Power Switch Filter Assembly Removal and Replacement
To remove the power switch filter assembly:
1. Complete the Fan/Bracket Assembly Removal procedure.
2. Remove the two screws holding the power switch filter assembly in place
(Figure 7.8-22).