Specifications

5. Slide the fuse box back into place. Press the cover until you feel it
snap into place.
COMPAQ PORTABLE 286 Fan/Bracket Assembly Removal and Replacement
To remove the fan/bracket assembly:
1. Complete the High Voltage Access Plate Removal procedure (see
Section 7.5).
2. Open the access door panel.
3. Loosen (DO NOT REMOVE) the screw that secures the fan/bracket assembly to
the chassis (at the rear of the monitor).
4. Now remove the remaining three screws that secure the fan/bracket assembly
in place (Figure 7.8-16).
5. Disconnect the fan/bracket assembly power connector from the power supply
assembly (Figure 7.8-17). Cut the tie wrap that holds the fan power cord
to the monitor enclosure.