NOTICE 2000 Compaq Computer Corporation COMPAQ and the Compaq logo Registered in U.S. Patent and Trademark Office. Microsoft and Windows are trademarks of Microsoft Corporation. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice.
CONTENTS USING THIS GUIDE................................................... 1 PRINTING ................................................................ 33 Text Conventions in This Guide................................ 1 Special Messages....................................................... 1 Locating Help ............................................................ 1 Printing a Document ................................................33 Changing the Printer Properties ...............................
Using This Guide Text Conventions in This Guide Basic Troubleshooting The examples below identify and explain specially formatted text that is used throughout this guide. The Basic Troubleshooting chapter of this guide shows how to fix many common All-In-One related issues. • The names of your keyboard keys, A1500 control panel buttons, and certain software instructions appear in a bold type. For example, Index Home, End, Tab, Start, Setup, or Cancel.
2
Getting Started Step 1: Unpack the Box When unpacking the box containing your Compaq A1500 All-In-One, make sure that all of the items listed below are included. If there are any missing or damaged parts, return the All-In-One in its original packaging to the place of purchase. Box Contents 1 One Compaq A1500 All-In-One—use the All-In-One for all of your 2 3 4 5 6 printing, faxing, copying, and scanning needs.
Step 2: Choose a Location for the A1500 To help guarantee trouble-free operation of your A1500, place it on a flat, stable surface. Leave enough space behind and in front of the A1500 to allow for easy paper loading, document removal, and for opening the control panel. ! CAUTION: Do not place the A1500 in direct sunlight, near heat sources or air conditioners or in dusty or dirty environments. Extend the Document Trays The A1500 ships with the document input/exit tray already installed.
Step 5: Connect the AC Power Cord Step 6: Install the Ink Cartridges This section shows you how to connect the A1500 to the electrical outlet using the AC power cord. 1. Lift the control panel by grabbing the panel along the top edge. 1. Connect one end of the AC power cord into the 2. Pull the control panel forward. back of the A1500. 2. Connect the other end into a standard AC power outlet (120V, 60Hz).
6. Insert the bottom of the black ink cartridge into the right carriage slot. Press back until the cartridge snaps firmly into place. Step 7: Connect the Telephone Line Cord This section shows you how to connect the telephone line cord to the A1500. You may also choose to add an extension telephone, answering machine or computer modem. If you have a single telephone line, this allows you to use your telephone when you are not faxing.
Step 9: Load Paper You can load up to 100 sheets of plain paper into the paper input tray. To load paper into the A1500: 1. Insert the paper into the paper input tray. Make certain the side you want to print on is facing you. Orient the head of the paper so that the head is facing down. 2. Align the paper with the paper guide. Squeeze the left paper guide and move it to the right to match the width of the paper. before printing on that paper.
Compaq A1500 Software Installation Although your Compaq A1500 can be used as a stand alone copier and fax machine, you will get the greatest benefit from your A1500 by connecting it to your computer and installing the included software.
Installing the Software Before you start, make sure your computer meets or exceeds the system requirements for the drivers and application programs you want to install. See “System Requirements” listed above. To install the Compaq A1500 software 1. Turn on your computer and let it complete its start up into Windows. 2. Plug in the A1500 power cable, then connect the USB cable to the PC. 3. Windows then detects new hardware.
Compaq A1500 Controls and Features Control Locations and Functions Take a moment to become familiar with the main components of your A1500. Control Panel The control panel is located on the front of the A1500. Control Panel Features Front view of the A1500 Controls 1 Setup Provides menus to access the system setup, cartridge maintenance, and print report features. 2 3 Menu Displays features for each operation. Options Changes the settings for that feature when pressed after the menu button.
Rear View Rear View Features 1 2 3 4 12 AC power cord connector. USB port (top right). Extension (EXT) Line to telephone or answering machine. Telephone (LINE) to wall jack.
Common Procedures This section describes several common procedures that you will need to operate your Compaq A1500.
Changing Default Settings The computer-based Compaq A1500 Settings Utility provides a simple user interface to change and set up the following features of the A1500: Setting the Date and Time A blinking date and time in the LCD panel will indicate that there has been a power failure. If power is lost for more than an hour, the correct time will be lost.
Printing Reports Transmission Report Default Settings When you send a fax from the A1500, you can choose to: • Print a report if there is an error sending the fax (this is the default setting) • Always print a confirmation report • Never print a confirmation report To make your selection, use the Message Confirm pulldown box in the Fax section of the Compaq A1500 Settings Utility. Fax Confirmation Report From the control panel you can print out a confirmation report for the last fax sent. 1. Press Setup 2.
Changing Print Cartridges ! CAUTION: When changing cartridges, avoid touching the motor located in the front right corner load area, as it can be hot. The system can keep track of the ink level in each of the three cartridge types: black, color, and photo. When you tell the system that a new cartridge has been installed, the ink level for that cartridge type is set back to full. If you tell the system that you are installing an old cartridge, the ink level for that cartridge type is not reset.
under it. Your pattern may have more letters than those shown below. 7. If you select Old Right cartridges in Step 4, press the Options button until the correct answer displays on the LCD panel. Press Start. 8. If any new cartridges were installed, then an alignment is required. An alignment pattern automatically prints. Go to step 6 of “Aligning Print Cartridges” in the next section below.
below is printed. Each pattern has a number under it. Cleaning Print Cartridges There are approximately 200 nozzles on each of the cartridges. Depending on the cartridge type, the nozzles are all one color (black) or split into 3 groups of different colors (color or photo). Cleaning the ink jet nozzles on the print cartridges improves the print quality. There are several situations that can result in some of the nozzles not working properly.
Checking the Cartridge Cleaning Printout 1. Examine the test pattern. The example below shows a test pattern of all nozzles functioning correctly. The first pattern printed in each group is from the black (or photo) cartridge. The second one is from the color cartridge. Cleaning the print cartridges When cleaning the color print cartridge, wipe the nozzles in one direction so the colors do not mix. To dissolve dried ink, hold a damp cloth against the nozzles for about three seconds.
• Photo cartridges should be used for printing pictures. Using it for normal faxing and black printing operations will prematurely deplete the black ink in the photo cartridge. • Printing black with the photo cartridge installed will be much slower than using the black cartridge. • Normal incoming faxes cannot be printed when the Photo cartridge is installed. They will be saved to memory so you may print them later.
Calibrating the Scanner The scanner may need calibrating if you see vertical streaks in your scanned or copied images. This procedure is also recommended after cleaning the document scanner. See the Maintaining Your A1500 chapter in this guide. To re-initialize the scanner calibration, complete the following steps: 1. Place a clean, white sheet of paper in the document input tray. 2. Press Setup on the A1500 front control panel. 3. Press the Menu button twice. MAINTENANCE will appear in the top line. 4.
Front Control Panel Setup Button From the Setup button on the All-In-One control panel, you can select the following features. Most of the features along with many more features are available from the Compaq A1500 Settings Utility on your computer. To access the Setup button features: 1. Press the Setup button. 2. Press the Menu button to cycle through Setup button features. 3. Press the Options button to change the settings.
Using the Compaq A1500 Settings Utility Settings Utility Overview The A1500 Settings Utility allows you to change the default settings of your A1500 All-In-One. For instance, if you make a copy by pressing the Copy button and then Start, the default copy settings will be used. Main Settings Window The main settings window is the starting point for accessing all of the A1500 settings.
Fax Type Print Settings Select the Print button from the main settings window to access the Print Settings. The Fax Type determines the type of fax to be sent, either Black, Black Photo, or Color. This will be the format used when sending the fax through email as well. When sending color faxes, the receiving fax machine will print in color only if it supports color. Otherwise the fax will be sent as a traditional black and white fax. Fax Resolution Select Standard, Fine, or Super Fine resolution.
Speed Send Setup Date and Time Press the Setup button to set up your list of frequently dialed fax numbers and to create group lists. See the Speed Send section for more information. The settings utility will synchronize the date and time between your computer and the A1500. If you would rather select a particular date and time yourself, uncheck the box and enter new values. Advanced Fax Settings Press the Advanced button to display the advanced fax settings. The advanced settings are described below.
Speed Send Settings The Speed Send Settings are accessed from the Fax Settings page. Fax Number If this person has a fax number, enter the number here. If you need to dial a number to access an outside line, be sure to include it. Use a comma or a “P” to pause the dialing. E-Mail Address If this person has an email address, enter it here. The A1500 can send faxes as email (see Type below).
Display Name Once you’ve chosen a group number, give the group a name. The group name can be up to 14 characters, and will be displayed on the A1500 LCD panel. The LCD panel will indicate whether a Speed Send entry is a group by displaying the word GROUP by the entry number. Group Members The Group Members list shows all of the members of the Speed Send group. Adding a Member To add a member to the group, select an entry in the Speed Send area on the left.
Scan Settings The Scan Settings window controls the scan type and contrast and the Scan To list. Scan To Email The second Scan To menu entry is always Email. To scan to email, you must have an internet account and connection, a valid email address, and an email program that supports MAPI (such as Microsoft Outlook, Outlook Express, Eudora, etc). By default, the TXT file format is used for Emails. Your documents will be scanned, converted by ReadIRIS, and then placed into the body of your email message.
Clearing an Entry Speed Send Entries To clear an entry of all information, first select the speed send number you wish to clear and then press the Clear button. This box will list all of the Speed Send entries you currently have defined. You must first set up your speed send list before you can add any entries to the Control Form. See the Speed Send Settings section earlier in this chapter for help. Scan Type By default, the A1500 performs normal resolution color scans.
Control Form Overview The Compaq Control Form is a paper document that you can use to give instructions to your A1500. You can mark it with a pencil or pen and feed it into the scanner. The A1500 software will then read your instructions and execute them. You may want to print several copies. Keeping a supply of printed Control Forms available will save time when you are ready for the A1500 to perform a task. Control Form provides an easy way to work with your A1500.
Using the Control Form to Copy 1. Press the Control Form button. A Control Form will print. 2. Check the Copy box at the top of the page. 3. The default settings on Control Form are indicated with a triangle. You can change these settings by checking the desired settings in the Copy Setting section. For example, if you want 9 copies, check the 9 box. 4. When you have made your selections, put the documents that you want to copy behind the Control Form.
Printing This chapter provides some basic steps for printing a document. The exact steps for printing may vary from one software program to another. Refer to your software application’s user manual for detailed printing steps. Printing a Document To print a document: 1. Start a program and create a document, or open an existing document that you want to print. 1. Left click on the A1500 Monitor icon in the system tray.
Booklet The Booklet option allows you to print a document out as a booklet. If the Print Instruction Page is checked, a page will print directing you how to insert the paper so that the booklet prints correctly. Poster Choose the Poster option from the Job Finishing Operations drop down list to enlarge the printed document. If you check Show Crop Marks, the image will print with crop marks. The white space around the image can be easily trimmed.
Options From the options tab, you can control some of the behavior of the Control Program. The options available will vary depending on your Operating System. Some of the options that might appear here include minimizing the window when a print job starts and enabling or disabling sound effects. Cartridges The Cartridges tab gives you access to several different cartridge functions.
Faxing The Compaq A1500 All-In-One offers three ways to send a fax: • Using the front control panel • Using the Compaq Control Form • Using the computer When sending color faxes, the receiving fax machine will print in color only if it supports color. Otherwise the fax will be sent as a traditional black and white fax. Loading the Documents 1. Place the document(s) to be faxed face down and top down in the document input tray. 2. Adjust the document guides to match the width of the document, if necessary.
Advanced Faxing Features In addition to the telephone number, you can adjust the fax resolution and contrast. Use the Menu and Options buttons located on the left and right side of the LCD panel. To access the advanced faxing features: 1. Load the documents printed side facing down in the document input tray. 2. Press the Fax button. 3. Enter the fax number using the numeric keypad. 4. Press the Menu button to cycle through the advanced fax features (See the table below). 5.
Speed Sending Up to 70 Speed Send numbers are set up on the host computer using the Compaq A1500 Settings Utility as described in the “Speed Send Settings” section of the Using the A1500 Settings Utility chapter. Once the Speed Send numbers are set up, you are ready to begin faxing with Speed Send. 1. Load the documents printed side facing down in the document input tray. 2. Press Speed Send (the # button). 3.
Confirming Transmission When the last page of your document has been sent successfully, the machine beeps and returns to the Ready state. If something goes wrong during the fax transmission, an error message appears on the LCD panel. Use the Compaq A1500 Settings Utility to print a confirmation report each time faxing is complete or when there is an error. See the “Compaq A1500 Settings Utility” section on Fax settings. Redial Pressing the Redial button dials the number that was last entered.
Distinctive ring is a telephone company service that enables a user to use a single telephone line to answer several different telephone numbers. Each phone number is identified by a distinctive ringing pattern consisting of various combinations of long and short ringing sounds. 2. Press the Menu button until FAX FORWARDING DRPD service must be obtained from your local telephone company. 4. Enter the fax number you wish to forward your appears. 3. Press the Option button until FORWARD appears.
3. Select the Advanced fax button 4. Click on the Forwarding Mode box and select Disabled. Determining the Fax Forward Mode If Fax Forwarding has been set for sometime in the future, the front Control Panel LCD will display FW before the Fax Receive Mode. For instance, if the receive mode has been set to ANS/FAX, it will appear as FW ANS/FAX.
Copying Copying Overview The Compaq A1500 All-In-One offers three ways to make copies. You can make copies: Loading the Documents 1. Place the document(s) to be copied face down and top down in the document input tray. If you are using the Copy/Scan Sleeve, place it top down (the top is the closed end) and clear side down. 2. Adjust the document guides to match the width of the document, if necessary. 3. Slide the document down into the tray until the machine grips the first sheet.
Advanced Copy Features In addition to the copy quantity, you can change the copy type, contrast, size, collate, and order from their default settings. This is done using the Menu and Options keys located on the left and right side of the LCD panel. To change the default settings instead, use the Settings Utility. To access the advanced copy features: 1. Load the documents printed side facing down in the document input tray. 2. Press the Copy button. 3.
Scanning Scanning Overview ! The Compaq A1500 All-In-One offers three ways to scan a document. You can scan: • Using the control panel of the A1500 • Using the Compaq Control Form • Using the computer Loading the Documents 1. Place the document(s) to be scanned face down and top down in the document input tray. If you are using the Copy/Scan Sleeve, place it top down (the top is the closed end) and clear side down. 2. Adjust the document guides to match the width of the document, if necessary. 3.
To use this option, you must have an email program installed on your computer, and it must support MAPI (a special mail interface). Examples of MAPI email programs include Microsoft Outlook Express, Microsoft Outlook, and Eudora. Also, you must have an internet account and an email address. By default, Scan To Email uses the TXT file type. This will convert your scanned documents to ASCII text and place the text in your email program for editing.
Advanced Scanning For each scan, you can adjust the scan type, contrast, and file type. Use the Menu and Options buttons located on the left and right side of the LCD panel to make adjustments. To access the advanced scanning features: 1. Load the documents printed side facing down in the document input tray. 2. Press the Scan button. 3. Select the Scan To destination using the Options button. 4. Press the Menu button to cycle through the advanced scan features. 5.
Maintaining Your A1500 Cleaning the Document Scanner For best quality faxes and scans, you may occasionally need to clean some internal parts of the machine, such as the: • white roller • scanning glass If these parts are dirty, documents scanned or sent to another fax machine will not be clear. To clean the internal parts of the A1500: 1. Unplug the power cord from the electrical outlet or the rear of the machine. 2. Open the control panel.
Alternate Setups Using the A1500 Extension Feature When sharing a telephone line between the Compaq A1500 All-In-One and other equipment use the EXT connection. If you wish to connect more than one device, a multiple outlet adapter may be required. To connect the A1500 to an optional extension telephone: 1. Plug one end of the telephone cord into the telephone. 2. Plug the opposite end of the cord into the socket marked EXT on the left side of the A1500.
DRPD The recommendations above for connecting additional devices still apply if using Distinctive Ring Pattern Detection (DRPD). The A1500 will only pick up calls made to the telephone number that has the Ring Pattern that it has learned. DRPD setup instructions may be found in the “Receiving Automatically in DRPD Mode” section of the Faxing chapter. Connecting and Configuring Equipment Deciding how to connect and configure equipment depends on the number of lines available and the intended usage.
A. A1500 and Telephone (optional) C. A1500 Computer Modem (Internal or External) and Telephone Telephone Wall Jack Telephone Wall Jack PC Modem Telephone Telephone A1500 Fax Receive Mode Selections A1500 Fax Receive Modes Mode Selection Description FAX Receives faxes automatically. TEL To receive faxes manually, press Start twice on the A1500 or press *9* on the extension telephone. ANS/FAX Do not use for this configuration.
D. A1500, Computer Modem, Answering Machine, and Telephone Telephone Wall Jack PC Modem Answering machine Telephone A1500 Fax Receive Mode Selections Mode Selection Description FAX Do not use for this configuration. TEL To receive faxes manually, press START twice on the A1500 or press *9* on the telephone. Also use this mode if you wish to receive faxes through the computer modem instead of the A1500. ANS/FAX Receives faxes automatically.
Basic Troubleshooting Many times, verifying that simple things are installed and/or connected properly solves any problem. Before continuing in this section, be sure to check: Clearing a Paper Jam • The A1500 has power (the LCD is on) If a paper jam occurs, the following message displays on the LCD panel: • The ink cartridges are present. Paper may get jammed in the printer exit. • The paper is installed. • The cables and cable connections are secure.
Error Messages Occasionally the A1500 may display an error message on the Control Panel’s Liquid Crystal Display (LCD) screen. Often, the error can be easily resolved and the current task can be completed. The following table lists the error messages you may encounter, the most probable cause, and a simple solution. General Error Messages SYMPTOM/MESSAGE CAUSE SOLUTION “ADD PAPER THEN PRESS FORM FEED” • • Load paper in the paper input tray then press Form Feed.
Fax Messages SYMPTOM/MESSAGE CAUSE SOLUTION “ENTER FAX NUMBER TO DIAL" with beep warning tone and return to READY state. “LOAD DOCUMENT" with beep warning tone and return to READY state. “RESOURCE BUSY, TRY LATER” with beep warning tone and return to prior state. An attempt to send a fax without entering a fax number. Enter a fax number before sending a fax. An attempt to start a fax operation before loading the document.
Copy Messages SYMPTOM/MESSAGE CAUSE SOLUTION “LOAD DOCUMENT" with beep warning tone and return to READY state. “ADD PAPER” with beep warning tone and return to READY state. “RESOURCE BUSY, TRY LATER” with beep warning tone and return to prior state. Tried to start a copy operation before loading the document. Tried to start a copy operation with no paper in the paper input tray. Tried to copy when the scanner is in use. Tried to copy when printer is in use.
Scan Messages SYMPTOM/MESSAGE CAUSE SOLUTION “SCAN TO UNDEFINED.” with beep warning tone and return to READY state. “LOAD DOCUMENT" with beep warning tone and return to READY state. “RESOURCE BUSY, TRY LATER” with beep warning tone and return to prior state. Trying to scan to an undefined scan destination. Trying to start a scan operation before loading the document. Trying a SCAN operation while the scanner is busy. Trying to scan while parallel port is in use by another task.
Control Form Messages SYMPTOM/MESSAGE CAUSE SOLUTION “RESOURCE BUSY, TRY LATER” with beep warning tone and return to prior state. Trying to scan Control Form sheet while the computer is using parallel port for another job. Trying to print a Control form sheet while computer is using parallel port for another job. Wait for current computer to printer port activity to complete, then try again. “CLR DOCUMENT JAM” A document jam or a very long document was scanned.
Correcting Problems Some of the problems that you may encounter are listed in the previous tables titled Error Messages. Occasionally, other problems may arise that you could solve yourself. They are listed in the following tables along with a possible cause and possible solution. Fax Problems Symptom Solution The machine is not working. There is no display. The buttons do not work. • • • • • • • No dial tone (when START key is pressed form READY display.
Print Quality Problems Symptom Solution Light or blurred characters • • • • • • • • • • • • • • Smudged or dark characters Characters with white lines Color print quality is poor. Characters are improperly formed or not aligned correctly. Vertical straight lines in tables, borders and graphs are not smooth. Solid black areas on transparencies contain white streaks. Printed color does not match screen color. Documents are printing black and white instead of color.
Printing and Copying Problems Symptom Solution Printer is on, but nothing prints. • Printer seems to be printing, but no characters are printing. Unexpected characters print or characters are missing. Printer prints very slowly. • • • • • • • • • • • • • • • • The printer may be improperly connected to the computer. Check the cable connections at the All-In-One and at the computer. Make sure that the printer cable is a standard USB cable. The USB cable may be defective. Try another cable.
Paper Feeding Problems Symptom Solution Paper is jammed • Clear the paper jam. See section, “Clearing Document And Paper Jams.” Paper sticks together. • • • • • • • • Make sure there is not too much paper in the paper input tray. Make sure you are using the correct type of paper. Fan the paper to allow some air between the sheets. Humid conditions may cause some paper to stick together. Make sure there is not too much paper in the paper input tray.
Scanning and Copying Problems Symptom Solution Cannot scan a document into memory. • • • Scanning very slowly. • • Make sure you load the document to be scanned into the document tray. Clear the problem that is preventing received documents that are stored in the memory from printing, i.e. low black ink or a paper jam. If there are any outgoing faxes stored in the memory waiting to be sent, print out the received documents that are stored in memory.
Regulatory and Safety Notices Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
European Union Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
For the Compaq Customer Support Center and your nearest Compaq Authorized reseller in North America, call 1-800-345-1518 or write: Compaq Customer Support Center P.O.
• Servicing Except as explained elsewhere in the Compaq documentation, do not service any Compaq product yourself. Opening or removing covers that are marked may expose you to electric shock. Service needed on components inside these compartments should be done by a Compaq authorized service provider. • Mounting Accessories Do not use the product on an unstable table, cart, stand, tripod, or bracket. The product may fall, causing serious bodily injury and serious damage to the product.
• Extension Cord If an extension cord or power strip is used, make sure that the cord or strip is rated for the product and that the total ampere ratings of all products plugged into the extension cord or power strip do not exceed 80% of the extension cord or strip ampere ratings limit. • Overloading Do not overload an electrical outlet, power strip, or convenience receptacle. The overall system load must not exceed 80% of the branch circuit rating.
INDEX A A1500 Preparing for Use, 4 Setting Up, 6 A4 Paper, 24 Loading, 20 AC Power Cord, 5 Accessing Control Program, 34 Settings Utility, 23 Add New Hardware Wizard, 10 Addresses Setting Speed Send, 26 Advanced Copy Settings, 44 Fax Settings, 38 Scan Settings, 47 Aligning Cartridges, 17, 35 ANS/FAX, 40, 42, 53, 54 Answering Machine, 51, 52, 53, 54 Applications Scanning to, 28, 46 Attaching Printer Cable, 7 Auto Reduction, 24 Automatic Receiving Faxes, 40 Redial, 40 B Black Draft, 44, 47 Black Normal, 44,
Using to Copy, 32 Using to Fax, 32 Using to Scan, 32 Control Form button, 11 Control Panel, 11 Features, 11 Control Program, 24 Accessing, 34 Printing, 34 Controls Location, 11 Copy Advanced Features, 44 Collate, 44 Contrast, 27, 44 Error Messages, 58 Order, 27 Overview, 43 Preparing Documents, 43 Problems, 63, 65 Quantity, 44 Quick Mode, 43 Settings, 27 Size, 27, 44 Type, 27, 44 using Control Form, 32, 43 Copy button, 11 Copy/Scan Sleeve, 37, 43, 45 Correcting Problems, 61 Curled Paper, 37, 43, 45 D Date
Receiving, 40 Receiving Manually, 40 Redialing, 25, 40 Resolution, 24, 38 Scanning to Memory, 25 Sending, 37 Settings, 24 Speed Sending, 39 to Everyone, 39 Type, 24, 38 using Control Form, 32, 42 Using Email, 39 Fax button, 11 Fax Forwarding, 22 Canceling, 41 Determining Mode, 42 Setting, 41 FCC, 66 Features Control Panel, 11 File Formats Supported, 28 File Type of Scans, 47 Form Feed button, 11 Forwarding Faxes, 25, 41 Fragile Documents, 37, 43, 45 From Entries Control Form, 29 Front Exit Tray, 4 FW.
Modem, 52, 53, 54 Modems, 67, 68, 70 Computer, 51 Monitor Program, 13 Icon, 23 N Name of Fax Machine, 24 Notices, 66 Nozzles Cleaning, 19 O OCR, 9 Quality, 46 OHD.
R ReadIRIS, 9, 28, 47 Rear View Illustrated, 12 Receipts, 37, 43, 45 Receive Log Printing, 22 Receive Mode Fax, 22, 24 Receiving Faxes, 40 Faxes Automatically, 40 Faxes Manually, 40 Reception Log Printing, 15 Recommendations Setting up, 4 Red X in System Tray, 13 Redialing Automatically, 40 Fax, 25, 40 Removing Packaging Materials, 4 Tape, 4 REN.
Scan Menu, 28 Scan Type, 29, 47 Speed Send, 26 Volumes, 25 Settings Advanced Fax, 25 Changing Defaults, 23 Copy, 27 Fax, 24 Main, 23 Print, 24 Printer, 33 Printer Properties, 33 Saving, 23 Scan, 28 Speed Send, 25 Settings Utility, 23 Accessing, 23 Setup Speed Send, 25 Setup button, 11, 22 Side View Illustrated, 12 Silent Operation, 22, 25 Size Copy, 27 of Copies, 44 Paper, 24 Software Installation, 9 Installing, 10 Media Browser, 9 OCR, 9 ReadIRIS, 9 System Requirements, 9 Utilities, 9 Speaker Volume, 25 Sp
V Vertical Streaks Scanner, 21 Volume Ringer, 25 Speaker, 25 W Web Site, 1 Wiping Cartridges, 19 Wrinkled Paper, 37, 43, 45 Index-7
