QuickSpecs
Power Specifications
DAT 40 DAT 72
DAT 160
Power Requirements
(SCSI-2 internal, hot-
plug, and array module)
+5V ± 5% (100mV Max
ripple) @0.6A
+12V ± 10% (150mV
Max ripple) @1.2A
+5V ± 5% (100mV Max
ripple) @0.6A
+12V ± 10% (150mV
Max ripple) @1.2A
n/a
Power Requirements
(USB, SCSI-3 internal
and SAS and array
module)
+5V ± 5% (100mV Max
ripple) @0.8A
+12V ± 10% (150mV
Max ripple) @0.3A
+5V ± 5% (100mV Max
ripple) @0.8A
+12V ± 10% (150mV
Max ripple) @0.3A
+5V ± 5% (100mV Max
ripple) @1.1A
+12V ± 10% (150mV
Max ripple) @0.4A
Power Requirements
(external)
100 to 240 VAC, 50-60
Hz, auto-ranging
100 to 240 VAC, 50-60
Hz, auto-ranging
100 to 240 VAC, 50-60
Hz, auto-ranging
Power consumption
(SAS) (average)
n/a n/a
10.3 Watts
Power consumption
(SCSI) (average)
7.3 Watts 7.1 Watts
10.3 Watts
Power consumption
(USB) (average)
7.3 Watts 7.1 Watts
10.3 Watts
Environmental
Specifications
(all models)
Relative Humidity
Storage
5% to 95%
Operating
20% to 80%
Temperature Range
Storage
-40° to 158° F/(-40° to 70° C)
Operating
41° to 104° F/(5° to 40° C)
Standards Compliance
cCSAus Certification to C22.2, No. 60950, TÜV EN60950 (IEC 60950), FCC and CE Declaration
of Conformity, C-TICK Approved (AS/NZS CISPR22), VCCI Approved, RRL Approved, BSMI
Approved, GOSH Approved
DAT 72 and DAT 40
drive LED Indicators
(with 2 LED indicators)
Tape LED
Clean LED
Meaning
Tape Ready Signal
On steady
Off
The data cartridge is loaded and the
drive is ready.
Tape Loading Signal
Flashing slowly
Off
The cartridge is loading or unloading,
or power-on self-test is in progress
Tape Activity Signal
Flashing rapidly
Off
The cartridge is loaded, activity is
occurring.
Media Caution Signal
Off or
flashing
Flashing slowly
If the media caution signal is
displayed:
The drive has detected that
cleaning is required tot maintain
good performance.
Wait for the current operation to
finish and clean the drive with an
appropriate cleaning media,
ensuring it has not expired.
Continue to use the drive as
before. If the signal repeats,
consider changing the data
media for new media when
convenient.
Regular cleaning (every 24
hours of tape pulling or weekly)
can prevent this signal being
QuickSpecs
HP StorageWorks DAT Drives
Technical Specifications
DA - 11883 Worldwide QuickSpecs — Version 28 — 1.26.2008
Page 29