User`s manual

Transparency Specifications
Overhead transparencies used in HP LaserJet printers must be able to
withstand the high temperature of 392° F (200° C) for 0.1 second
encountered in the printer’s fusing process.
Caliper 0.0039 to 0.0043 in. (0.10 to 0.11 mm).
Cutting Angle 900 +/-0.20.
Electrical Surface Resistivity 2.0 to 15 x 10
10
ohm per square.
Electrical Volume Resistivity 1.2 to 15 x 10
11
ohm-cm.
Finishing
+/−0.03 in. (+/-0.8 mm).
Fusing Compatibility All materials of the overhead transparency must be compatible with the heat and
pressure of the fusing process. Materials must not discolor, melt, offset material, or
release hazardous emissions when heated to 392° F (200° C) for 0.1 second.
Table B-4 Transparency Specifications
B-6 Print Media Specifications EN