User`s manual

Acid Content 5.5 pH minimum
Ash Content Not to exceed 10%
Basis Weight Paper Output Bin: 16 to 28 pound bond (60 to 105 g/m
2
)
Front Output Slot: 16 to 43 pound bond (60 to 163 g/m
2
)
Brightness 83% minimum
Caliper +/- 0.03 to +/- 0.08 in. (0.09 to 0.2 mm)
Curl In-ream: flat within 0.2 in. (5 mm)
Cut Edge Conditions Cut with sharp blades, no visible fray.
Electrical Surface Resistivity 2.0 to 15 x 10
10
ohms/sq. (conditioned @ 23° C & 50% RH)
Electrical Volume Resistivity 1.2 to 15 x 10
11
ohms-cm (conditioned @ 23° C & 50% RH)
Finishing
Cut sheet to within 0.3 inch (0.8 mm) of nominal, 0.20° square.
Furnish (Composition) 100% chemical wood pulp and/or cotton fiber
Fusing Compatibility Must not scorch, melt, offset, or release hazardous emissions when heated to
392° F (200° C) for 0.1 second.
Grain Long grain
Moisture Content 4% to 6% by weight
Opacity 85% minimum
Packaging Polylaminated moisture proof ream wrap.
Smoothness 100 to 250 (Sheffield)
Stiffness 1.6 minimum machine direction, 0.6 minimum cross direction (Taber)
Wax Pick 12 minimum (Dennison)
Table B-1 Paper Specifications
B-2 Print Media Specifications EN