User`s manual

Error (light continuously on)
If the Error (top) Light is continuously on, the printer has experienced an
error. Check for the following problems in the order given:
1. The printer is out of paper. Add paper if necessary.
2. The printer’s top door is open. Close the door.
3. The toner cartridge is either missing or not installed correctly. Install a
cartridge into printer, being careful to position it correctly.
4. There is paper jammed in the printer. Clear the jam to resume printing
(see "Clearing Paper Jams" in Chapter 6).
If after checking for the above problems, the Error (top) Light remains lit,
reset the printer. If the light remains on:
5. If there is no jammed paper, disconnect the power for 10 seconds,
then reconnect to the power source.
6. If the error still does not clear when you reconnect the power, your
printer needs service. Contact your nearest HP dealer for instructions
on how to obtain service (see inside front cover).
Error (light blinking) Page Too Complex
If the Error (top) Light is blinking, the page may be too complex for the
printer’s memory capacity or the printer may not be able to create the
image fast enough to keep pace with the engine printing process.
Action: Briefly press and release the Front Panel Button to continue
printing. There may be some data loss on the page.
Hint: To avoid this error in the future:
•• See your printer driver help for more suggestions regarding printer
memory usage.
•• Reduce resolution to 300 dpi with your software.
•• Install additional printer memory (see Appendix D for information on
installing additional memory).
3
Using the Front Panel
EN Using the Front Panel 3-3