User`s manual

Printer Busy
If the Data (middle) Light is on steadily and the Ready (bottom) Light is
blinking, the printer is receiving or processing data.
Action: No action is necessary.
Form Feed
If the Data (middle) Light and the Ready (bottom) Light both remain on, there
is unprinted data still in the printer. This usually happens when you perform a
“print screen” function in DOS or use software that does not send an
“end-of-job” or “form feed” command when it finishes printing a file.
Action: Briefly press the Front Panel Button to print the remaining data.
Manual Feed
If the Data (middle) Light is blinking, the printer is in Manual Feed mode.
Action: Make sure you have the correct paper in the Single Sheet Input
Slot or the Paper Input Bin, and briefly press and release the Front Panel
Button to print.
3-2 Using the Front Panel EN