User`s manual

Status Monitor
The Status Monitor displays a message on your computer’s screen each
time the printer’s status changes. The Status Monitor will report any
problem, error condition, or other status message directly to your printer
screen (when the printer is connected directly to the parallel port).
Note
The Status Monitor will only work when the printer is connected to the
computer with a high quality IEEE-1284 compliant parallel cable. For
more information see Appendix C.
To access the Status Monitor follow these steps:
1 Make sure that the Status Monitor is located in your path statement.
You can check your path by typing PATH and pressing [Enter]. If the
Status Monitor directory is not in your path, you will have to change to
the default directory C:\HPLJUTIL to start the program.
2 At the DOS prompt type STAT and then press [Enter].
For help information, click on Help.
2
Using your Printer Software
EN Using your Printer Software 2-5