User`s manual

Installing the DOS Printer Software
Each DOS software application requires a separate printer driver. This
installation program will install printer drivers and utilities for the
following DOS applications:
• WordPerfect (versions 5.1 and 6.0)
• Lotus 1-2-3 (versions 3.1 and 3.4)
See Chapter 2 for more information on DOS printer software.
Installing the supplied DOS printer software
1 Locate the disk titled HP LaserJet 5L DOS Utilities and DOS Printer
Drivers, Disk 1 and insert it into your drive.
2 At the DOS prompt type A:SETUP and press the [Enter] key on your
keyboard.
3 Follow the instructions on the screen.
Note
Generally any changes made to the printer settings (through the Remote
Control Panel- see Chapter 2) are lost when the printer is unplugged or reset.
If you choose the Option to Update Default Printer Settings during
installation, your printer settings will be saved in a file containing printer
defaults (C:\HPLJUTIL\DEFAULT.PJL). This file will be automatically sent
to your printer each time you turn on (or reset) your computer. You will not
need to manually change the settings again in the Remote Control Panel. This
option will add a line to your AUTOEXEC.BAT file during installation. If
you do not desire this option select “No” when prompted.
To obtain printer drivers for additional DOS applications:
• Check your software’s installation disks to see if they include support
for the HP LaserJet 5L printer.
• Order an updated driver from your software vendor.
Note While you are waiting to receive a driver for the HP LaserJet 5L printer,
you can substitute a driver for a similar HP LaserJet printer. These
substitute drivers will allow you to use your HP LaserJet 5L printer, but
may not support all of the printer’s features.
1-10 Setting Up the Printer EN