User`s manual

Step 6. Load Paper into Printer
Paper supports are located behind the
Paper Input Bin and the Paper Output Bin.
These supports can be extended for
different lengths of paper.
1 Raise the Paper Input Support until it
snaps into place. Also raise the Paper
Output Support (not shown) unless you
are using the Front Output Slot.
Note
Using paper supports can help prevent
unwanted paper curl and paper jams.
2 Insert up to 100 sheets of paper
vertically into the Paper Input Bin. Be
careful not to overfill. The Ready
(bottom) Light will come on.
3 Center the paper with the paper
guides on the Paper Input Bin.
You may print a self test to check that
your printer is working properly. A Self
Test will show examples of the available
fonts and current printer configuration.
4 Briefly press and release the front
panel button. The Data (middle)
Light comes on, and the Ready
(bottom) Light blinks.
5 Please wait until a Self Test page
prints.
1-8 Setting Up the Printer EN