User`s manual

Step 2. Install the Toner Cartridge
1 Open the Printer door. Remove the
toner cartridge from its bag and save
the packaging for possible cartridge
storage.
Caution
To prevent damage, do not expose the toner
cartridge to light for more than a few
minutes. For extended periods outside the
printer, place the cartridge in a closed
drawer, the original packaging, or cover
completely with a cloth.
2 Shake the cartridge vigorously to
distribute the toner evenly inside the
cartridge. Avoid tipping the cartridge
on end.
3 Grasp the end of the clear sealing tape
on the side of the cartridge and pull
firmly to remove the entire length of
tape (19.3 in / 490 mm).
4 The ends of the cartridge slide into
the black plastic grooves in the
printer. Hold the cartridge by the
handle (so that the arrows are facing
the printer) and slide it down and
back into the printer. Push it firmly
into place and close the printer door.
Note
If toner gets on your clothing, wipe it off
with a dry cloth and wash clothing in cold
water. Hot water sets toner into fabric.
1-4 Setting Up the Printer EN