Installation guide

Connectors, LEDs, and Switches
Table 4-4: ProLiant BL20p G2 Server Blade Front Panel LEDs
Item LED Description Status
1 Unit identification Blue = Flagged
Blue flashing = Management mode
Off = No remote management
2 Health Green = Normal status
Flashing = Booting
Amber = Degraded status
Red = Critical status
3 NIC 1
4 NIC 2
5 NIC 3
Green = Linked to network
Green flashing = Network activity
Off = No activity
6 Power On/Standby Green = On
Amber = Standby (power available)
Off = Unit off
Hot-Plug SCSI Hard Drives
Each hot-plug SCSI hard drive has three LED indicators located on the front of the drive. The
LEDs provide activity, online, and fault status for each corresponding drive when configured
as a part of an array and attached to a powered-on Smart Array controller. Their behavior
may vary depending on the status of other drives in the array. Use Figure 4-6 and Table 4-5 to
identify LED locations and functions.
Figure 4-6: Hot-plug SCSI hard drive LEDs
4-6 HP ProLiant BL20p Generation 2 Server Blade Maintenance and Service Guide
HP CONFIDENTIAL Codename: StormX Part Number: 000000-000 Last Saved On: 4/3/03 1:06 PM