Specifications

5-22 Removal and Replacement Procedures
5.7 MultiBay Devices
Removing MultiBay Devices
1. Save all work, exit all applications, and shut down the computer.
2. Remove the media (diskettes, CD-ROMs, etc.) from the drive. Ensure that the
CD tray is closed.
3. Tilt the computer at an angle
1
so the bottom of the computer is accessible
(Figure 5-20).
4. To remove a device from the top MultiBay, slide the rear MultiBay release latch
toward the front of the computer
2
.
5. To remove a device from the bottom MultiBay or to remove a device that occupies
both MultiBays, slide the front MultiBay release latch
3
toward the back of the
computer.
6. Grasp the device using the recess
4
beneath the MultiBay and remove the device.
Figure 5-20. Removing a Device from the MultiBays
If you are not inserting another device or a battery pack into the MultiBay, insert the
MultiBay weight saver included with the computer.